What you get ...
è	Bulk Ink tanks	One for each color channel.
è	Vacuum pump	Used to prime the ink tanks, so no air enters the ink lines. This procedure is recommended on first time use and any time inks are changed-if applicable.
è	Auto-reset chips	Ink counters reset automatically, when low-ink light is blinking, by simply raising and lowering the ink levers. This procedure eliminates the need to remove the cartridges and reset the chips manually, which could lead to ink leakages over time.
è	Funnels	One for each color.
è	Latex gloves	For both Hands!!
è	Two Maintenance tank refills	An $80.00 value. These are used when the maintenance tank is full of ink. Replacing the cartridge instead of the complete plastic tank is cheaper and an environmentally sound practice.
è	Operating instructions	Naturally!!

Why Stuff4Print Recomends this System ...
C	The ink tanks are very well built compared to other similar systems.
C	The bottles on the tanks make them very easy to fill, most systems just provide a small hole, which can be very messy.
C	The clear bottle gives a good visual indication of ink levels.
C	We have not had one complaint from a customer about this system.
C	You have the option to fill all tanks with Black Ink, and use AccuRip to print from all tanks.
C	The cost of the system is cheaper than replacing with genuine cartridges.
C	You do not need to replace all the cartridges at once, just replace the cartridge with a tank when that color empties.
C	The Cost in Use is very low compared to Genuine cartridges or even replacement cartridges.